Care for your chain using a Chain Lubrication Spray is one of the most fundamental, yet crucial, aspects of motorcycle care.

Disregarding this could result in chain wear, which might cause even more problems by ruining your engine. It is critical to keep your chain in good working order and to examine it for scuffs regularly.

We at Kangaroo Auto care want to assist you with this, so we’ve included a step-by-step guide below that focuses on how to properly apply chain lubricating spray to a bike.

Step 1: Ensure a Proper Mount

As with any type of motorcycle repair, the very first step is to ensure that your motorcycle is properly mounted. Take use of center stand or the rear stand

While placing something behind the back wheel, such as a tarp, office paper, or carton, as the area will undoubtedly become cluttered while you work on the chain.

But most importantly whatever happened, don’t forget to turn off the engine while you’re doing this.

Step 2: Apply the spray

Once you’ve set up your bike and your private space, you’ll need to use the correct chain cleaner to loosen all of the dirt and grime that has accumulated on your chain. It’s best to use a chain cleaner that’s designed to dissolve oil and part ways the filth that’s built up around your chain.

In the lack of it, people turn to kerosene, and it is both inexpensive and efficient. The only aspect you want to make sure of is that you don’t skimp on the chain-spraying.

You’re ready to move on to the following stage once you’ve coated the entire area with the cleaning substance.

Step 3: Scrub

If you want to go for the premium option, specialized chain “grunge” brushes, which can wash either side of the chain at the very same time, is highly recommended in the market and can, obtained easily in stores or online.

Of course, if you don’t care, a good ole fashion toothbrush will suffice. You might just have to put in a bit more effort thought.

After brushing all of the components, re-spray the entire chain with a cleaning agent to remove any lingering sticky residue before rinsing it with water. Lastly use a dry cloth to wipe away any extra moisture from the chain before actually applying lubricant.

Step 4: Using Lube Spray

Finally, let us discuss Chain Lubrication Spray. Once you’ve cleaned away all of the tenacious grime & filth from your chain. Almost complete the operation; it’s time to apply some suitable lubrication.

Other chemicals, such as WD-40, are often used as a substitute, but they are in no way as effective in effectively lubricating your chain because they are more of a flow measurement solution than a lubricant.

The chain would be protected from dirt, friction, or oxidation if the chain was lubricated using a branded chain lubricant.

Step 5: One Final Check

After you’ve cleaned your chain of dirt and filth, check the tension of your chain to see if it needs to be adjusted.

If all good pat yourself on the shoulder once you’ve finished cleaning it because you’ve just accomplished critical motorbike maintenance. Easy as that!

We hope that by following this step-by-step guide, you were able to learn how to use the Chain lubrication spray properly and secure your riding experience.