If you have a passion for motorcycles, it is essential to pay attention to every component. In fact, when you notice even a small scratch, you try to run away immediately. There are various situations in which you can make scrapes or minor injuries to the hull of the bike. You can also decide to act personally without resorting to a mechanic. Sometimes with a few simple steps, you can get the desired result, and then you avoid taking the bike from a coachbuilder to make it varnish. Reading this tutorial, you can have some useful tips on how you can intervene to cover the scratches of a motorcycle.

The first thing to do is to remove the part of the hull that needs to be painted. After the shell has been prepared, it is necessary to start using a glass paper of 400, then to arrive at a 900 (logically the work must be done with water). After the relevant hull has been sanded, it must be cleaned of impurities such as dust or other debris that have been left on the glass paper. This operation should be done using a little water with a wrung out cloth. At this point, it is necessary to pass a white coat of adhesion to prevent the paint from coming off when the work is finished. After giving the adhesion, the painting work must begin.

Now you have to take the compressor with the paint and start spraying at a distance of 25/30 cm to be able to give a fair color. Apparently, you have to make several passes before getting a good result. It is desirable to wait at least 3 hours between one pass and another.

In fact, thanks to the bike scratch remover manufacturer in delhi, the paint does not drip from the hulls and allows it to be held firmly by the latter. If at home there are some useful products to cover the scratches like Polish or Wax it is advisable to pass them over the hull with a cotton cloth. This way you can keep it shiny and dust-free.

To complete the work you need to perform the last step to cover the scratch. It is advisable to use several passes on the hull with the polish; in this way it is possible to keep the colors as long as possible over time. After making these short steps, you can let everything dry and avoid using the bike for at least the first two days. When the necessary time has elapsed, you can once again start traveling on your motorcycle.