How To Select And Use Rubbing Compounds To Remove Residues-Scratch Out

Have you ever wondered where the difference lies when it comes to rubbing compound versus enamel? A rubbing compound is a somewhat old-fashioned term for a product that contains very aggressive ingredients that, if not used correctly, can eventually damage the paint more than you started. This is not a product that paint finishing professionals usually use every day.

Professional products with aggressive abrasive content are designed to quickly remove heavy 1200-grain scratches, usually with a rotary machine and a bonnet of wool, something that only the most experienced professionals know how to use with precision. They also require several more steps with different products to achieve a restored finish. You can contact car scratch remover manufacturer in India to get the best product for your car.

In general, you can easily find car compounds on the market that are not difficult to find in large marts, self-car washes, or from rubbing compound manufacturers in Delhi. However. In general, there are many products with added abrasive and filling components, so if misused, the difference between the working part and the non-working part can be obvious. Owners can directly remove residues on the vehicle. Let’s see how to select and use compound.

The abrasive ingredient is a product that is roughly grained like grains of sand, but contains finer particles to use on the painted surface of vehicles, so that it can be cut off. Depending on the size or strength of the abrasive ingredient, the ability to grind and the working time will vary. It is important to check the condition of the painted surface first and then select and use best rubbing compound for car scratches for the hardness of the work.

Choice of best rubbing compound for car scratches

Usually, using a rubbing compound, the situation of stress is that the fine painted surface around the painted surface and the difference in color or light intensity are visually confirmed. The reason for this is that other fine scratches caused by the compounding work may cause diffuse reflection or excessively partial work may have created an interface with the surrounding clear coating layer. Therefore, when removing partial scratches using a compound by hand, it is necessary to spend a little more time working with a medicine that has a slightly weaker cutting force for fine particles than a compound with a strong cutting force.

Usually, the compound can be divided into a variety of cutting forces suitable for use with machine polishers and general owners. Compounding the machine polisher is the most effective way to remove scratches, because compound can produce the best results when used together with a pad.
How to use compound?

If you decide to work with the owner’s compound, you must first clean up the painted surface to work with. After washing is basically done, it is more effective to clean and clean foreign objects and old dirt using a paint cleanser. The owner compound is easy to use.

It is recommended that you take the appropriate amount of the medicine using a soft microfiber applicator or foam applicator, and then work as wide as 1.5 to 2 times the area to be worked. Gently rub in a circular motion and carefully scrub to see how much scratches have been removed.

Scrub until best rubbing compound for car scratches is almost transparent and repeat it if the desired amount of cut is not achieved. After removing the scratch, the remaining medicine can be wiped off with a clean towel.

Leave a Reply

Your email address will not be published. Required fields are marked *