If you are a regular motorbike enthusiasts or even a daily rider, it is nothing less than a ritual to maintain the performance and longevity of your bike. To do so, you need to focus on the maintenance of chain. Proper care and maintenance can be made a fixture with the use of chain lubricant spray which can significantly extend the life of your motorbike chain. Even in the rough conditions, the bike can retain much of its pristine even under rough conditions.

Why Chain Maintenance Matters

The motorbike chain is a vital part of your bike’s drive system, transferring power from the engine to the wheels. Due to its constant motion and exposure to various elements, the chain is subject to significant stress and wear. Regular maintenance, specifically using a chain lubricant spray, is essential to ensure smooth operation and prevent premature failure.

Benefits of Using Chain Lubricant Spray

1. Reduces Friction: The key function of a chain lubricant spray is to minimize friction between the chain links and sprockets. With reduced friction, there is less generation of heat. This prevents the chain from stretching and wearing out quickly. Hence, the bikers who are treading across the rough conditions can keep their bikes less exposed to damages.
2. Prevents Corrosion: Chains are pretty much vulnerable to moisture, dirt, and road grime. This can lead to rust and corrosion. With the good use of a good chain lubricant spray, a protective barrier is created and the same repels water and prevents rust formation.
3. Enhances Performance: A well-lubricated chain is good at bringing the best out of a bike as the power transmission gets smoother from the engine to the wheels. Another perk of having well lubricated chain and transmission is that they enhance fuel efficiency. Regular application of chain lubricant spray gives the best performance for chain at its optimal level.

How to Apply Chain Lubricant Spray

Applying chain lubricant spray is pretty much an easy job and one can do it without breaking a sweat by following these steps.

1. Clean the Chain: Prior to applying the lubricant, do clean the chain thoroughly. To do this, it is advised to use a chain cleaner or degreaser to remove any dirt, grime. Even the old lubricant can be removed by following this process. With this, it can be ensured that the new lubricant adheres properly and provides maximum protection.
2. Dry the Chain: The chain must be kept dry after cleaning. There must not be any room for moisture that is left on the chain. The moisture that stays prevent the lubricant from sticking effectively.
3. Apply the Lubricant: As a better practice, shake the can of chain lubricant spray well. At the time of application, hold the can close to the chain and spray evenly along its length. Whilst spraying, keep rotating the wheel to ensure that all parts of the chain are covered. It is advised to be thorough but avoid over-saturating the chain at the same time since this action can attract dirt and grime.
4. Wipe off Excess: Post lubricant application, one needs to use a clean cloth to wipe off any excess. A clean cloth can prevent the accumulation of dust and dirt, keeping the chain cleaner for longer.

Conclusion

Regular maintenance of your motorbike chain using a chain lubricant spray cannot be underestimated as it can prolong your bike’s chain health and all other components significantly. Reduction of friction is possible through a good chain lubricant spray only. Choose the perfectly formulated chain lubricant spray from the house of Kangaroo Autocare to keep your chains rust free. We are also the manufacturers of some of the best car and Kangaroo Autocare products which can enhance the cosmetic appeal for your vehicles.