If you are an owner of a newly acquired car, you might have hired about the issue of swirl marks, and how you should utilize Car Swirl Mark Remover to handle it but of course that easy said than done.

Although you can’t feel swirl marks with your fingers. They are a common type of imperfection that is not difficult to remove. You can easily remove them using a branded Car Swirl mark remover. And we, at Kangaroo, have exactly what you need. But, before we dive into that, let’s start with the basics

What Is Swirl Marks and What Exactly Causes Them?

You might be creating swirl marks, every time you wash or clean your car. This is the number one cause of minor injuries. Its gravity depends on your tools, but also on how they are used and the contaminants available. A high-speed buffer works wonders for heavy rusts or minor scratches, but many professional auto detailers don’t have the training or experience to use the tool correctly. When trying to blend touch-ups perfectly, the result is often even polished pad marks in the paint. This somewhat avoidable side effect is called paint holograms or buffer traces. These traces of rotation are common on the bonnet and trunk. It can also appear on doors and bumpers on dark cars. But don’t be fooled into thinking a white car doesn’t have this flaw; light colors also show Swirl Marks as they reflect more light.

How to Remove Swirl Marks By Hand – Try This First

Now let’s get started with the main topic. If you have a light amount of swirl marks or maybe a single panel that was wiped down incorrectly, Our Car Swirl mark remover is a great, easy-to-use scratch and swirl remover that provides professional results safely. It uses high-tech diminishing abrasives, allowing you to level scratches and swirl marks while providing a haze-free and glossy finish.

Most cars contain large amounts of iron residue from contaminants such as brake dust and construction sites. Removing this iron contamination is essential to move on to the next step. Use a high-quality iron rain remover to paint your car surfaces in a shady spot and let it work for a few minutes. Kangaroo products are great for this. If you used it in the previous step, you better go! After a few minutes, you will see purple spots around the car. This contamination is caused by the breakdown of iron. After approx. 5 minutes, wash the machine thoroughly and then dry it thoroughly with a microfiber cloth.

After the Clean Up

Once your car is clean and dry, get a new microfiber cloth or pad. Pour a few drops of Our Swirl mark remover and apply to the area. Work in overlapping circular movements and wipe off the excess with a fresh microfiber cloth for a deep, non-rotating shine. Repeat this process around the car dashboard to complete the process.

One Last Thing

Don’t forget to wash the car before polishing because if dirt and grime stick to your application screen, it will only scratch the paintwork more. So wash and dry the car thoroughly with some good quality car soap and two bucket detergents. Start at the top of your vehicle and work on each board separately.

Be sure to wash your gloves in the bucket and apply more soap after each panel; this will maximize the cleaning power and also prevent the car from getting dirty. After washing, wash off excess soap and dirt and machine dry with a good quality microfiber cloth.

If you are interested in our Car Swirl Mark Remover, head on over to the Kangaroo, and check out our extensive range of the products