Home/Car Wax Polish/Five Steps to Caring For Your Motorcycle Chain with the Best Chain Lubricant

Five Steps to Caring For Your Motorcycle Chain with the Best Chain Lubricant

It’s not extremely difficult to detail an automobile. However, even washing a car has the potential to be extremely harmful if improper techniques or products are used. But being aware of the required actions and the best products is only half the battle experts in car detailing product.

For instance, you might wish to discard any towels, mitts, or other non-microfiber car cleaning fabrics or sponge-like materials you own. The only place for materials that damage the surfaces of vehicles is the garbage can. Keep in mind that our goal is to return a car’s exterior to its pre-damage condition rather than to cover it in a ton of dings and swirls like a salaryman escaping the dominatrix prison.

If left to sit for a long time, contaminants such as dirt, mud, road filth, bird droppings, bug guts, pollen, deicers, and sap can progressively soak into a car’s clear coat. Being lazy won’t help you in the long run, so clean that machine once a week, if you can, and keep in mind the following laid out Kangaroo, one of the most satisfactory experts in car detailing product in India.

  1. Avoid washing your car in the sun.

A heated surface or direct sunlight will have an adverse effect on almost all detailing products. Heat also hastens the drying of soap and water, leaving lingering water stains and streaks. Work only when the outer surfaces of the car are completely cool to the touch, either inside or in the shade.

  1. Keep cross-contamination at bay

When you use the same supplies for each step of the cleaning procedure during a car wash, cross-contamination happens. Therefore, avoid using the same items (towels, brushes, buckets, water, etc.) for different tasks or parts of the car. This is because you don’t want to scrub a relatively clean area of the vehicle with a dirty micro fibre mitt or transport contaminants from one area of the vehicle to another. When cleaning particularly dirty places like wheels, lower rocker panels, bumpers, and exhaust ports, it’s crucial to keep this in mind.

  1. Apply the “two buckets and a beer” strategy.

Cross-contamination can be reduced by often emptying your water container and by not using the same towel or mitt on every surface. However, the two-buckets-and-a-beer method is just as important. You may make a secure location for dipping that dirty sponge in between scrubbing by having a bucket for rinse water and another for sudsy water. This helps keep the bucket of soapy shampoo clean. The beer serves as consolation.

  1. Go down the ladder starting at the top.

An automobile’s lower parts come into direct touch with road debris, and you don’t want that dirt to transfer to the higher, much cleaner, parts of the car. However, it’s not a good idea to scrub your wheels and tyres with soap and water. Instead, focus on other parts of your vehicle first. Use a reliable spray-on, rinse-off cleaner that has been tested on the kind of wheels you roll on so that the dirtiest area of the automobile can receive a concentrated blast of cleaner. Next, wash the vehicle from top to bottom, saving the wheels and tyres for last so as to prevent cross-contamination.

  1. Constantly apply lubrication.

Not just our sinister parts benefit from a little lubrication when there is friction. Vehicle paint and clear coat require something slippery in addition to a gentle wipe-down with an ultra-plush microfiber dusting cloth to prevent marring. This step might be a little troublesome for newcomers, as it is easier to make mistake if you aren’t familar with the hand on experience, that’ why we highly recommend hiring or utilizing experts in car detailing product like Kangaroo.

  1. Purchase the proper equipment and towels.

As we’ve already explained, using sponges and conventional cloth wash towels to clean the exterior of a car is like using 120-grit sandpaper in the shower. Yes, it will exfoliate, but at what cost? For cleaning and drying your automobile, invest a little bit in some soft microfiber towels and a good wash mitt to significantly lower the possibility of scratching the surface. Order a pH-balanced vehicle shampoo while you’re at it as well, since, while regular dishwashing liquid works well on bacon grease, it will utterly ruin a car’s clear coat.

One Last Thing

Protection is a key component of car detailing, along with glossy exteriors and pristine interiors. The first step in the long journey to retaining the charm of the automobile is routine hand cleaning. Remember that even detailing black cars demands special attention from experts in car detailing product like kangaroo.

 

By | 2022-09-01T11:21:50+05:30 August 16th, 2022|Car Wax Polish|0 Comments

About the Author:

Leave A Comment