Scratches on the surface of the vehicle, wood rubbing, stone, stone splashing, rubbing the vehicle and so on. It can occur for many reasons. Scratches on the bodywork cause both a bad appearance and a loss of value. Scratches that do not intervene in time can deepen and become permanent after a while.
To prevent scratches on the bodywork of your vehicle; you should not place your car in narrow areas in parking lots, places where tree branches are frequent or in places where frequent car parks are not made. Careful use of your vehicle in narrow spaces will prevent scratches due to friction. In spite of all the attention you have shown, the car body scratches caused by the reasons outside you may be seen.
So how to remove scratches on the bodywork? “What precautions can be taken to prevent scratches?”
Polishing Machine Can Be the Solution
Some of the scratches on your car can be removed with chemicals provided by the car scratch remover manufacturers in India and some with the help of a machine called polishing. As another method, pastry polish affects the covering of scratches.
Determine Depth of Scratch Formed in Vehicle
The vehicle paint consists of 4 layers, so it is important to determine which layer the scratch is on and to see if we can correct it. To understand this, run your fingernail over the scratch at a right angle, if your fingernail is not attached, you can clean the scratch yourself.
Flush Your Vehicle before Starting to Clean the Scratch
Removing dust from the vehicle will prevent the scratch from deepening.
If the scratch is not too deep, use a scratch pen that matches the color of your vehicle
If the scratch on your vehicle is not too deep, you will be able to cover it with the scratch pen. Firstly, you can find the appropriate color for your vehicle color and then paint the scratches on your vehicle with it. The most important point to be aware of when using the scratch pen is that you do not protrude from scratch during the painting process. If you paint the non-scratched area on the fairing, the scratch pen will leave a stain on the fairing.
Depending on the size of the depth, you may need to use sandpaper or direct polish.
If the depth of the scratch on your vehicle is light and level, you can directly remove the scratch with a polish. If there is a medium or heavy scratch, the surface of the scratch must first be sanded. Thus, the depth of the paint around it is evenly equalized.
You can eliminate the scratch by applying the paste and polish
You will first need to spread the wax on the area where the scratch is formed. To do this, you can spread the polish for 15 seconds by operating the polishing machine at the lowest setting. Then polish the bodywork by increasing the speed and moving the machine back and forth and left and right with slow movements. Check the surface at 1-minute intervals. If the surface becomes very hot during the process, do not forget to cool with water. You can also leave this work to bike scratch remover manufacturer in India.