Home/Blog, Chain Lubricants/Motorcycle Cleaning: The Crucial Process You Must Not Ignore

Motorcycle Cleaning: The Crucial Process You Must Not Ignore

We all fantasize of a high speed bike running at the top gear and meaning nothing but mean speed. Most of us do have such bikes as well. They are an investment as well as a belonging which gives them a stronger sense of attachment. Hence, it is only obvious that the motorcycle is given the care it deserves, right? A motorcycle needs the bike scratch remover manufacturer in India as an agent to remove the stains. Add to that there are a few basic things to be followed. Let’s have a look.

  1. Stay away from commercial washing facilities and do it yourself. Don’t do it on the street or in a unit driveway as it’s dangerous. Also, never wash straight after a long ride. Therefore, you need to let the bike cool off for a bit and not start splashing water on hot engine straightaway. Also, one must not be out in the direct sun as the cleaning component could stay on the bike’s surface before you can rinse them off, leaving streaks. Contaminants in water, such as mineral deposits, also become much more aggressive when warm and, if water is sprayed on a hot bike, those water spots are more difficult to remove. If you are a bit of a greenie, wash on your lawn to water your grass and prevent precious water, harmful detergents and pollutant grease from running into storm water drains.
  2. It is okay you wash your car. All you got to ensure is that the process is not overdone. This is a bit of a balancing act. Frequent washing can help you keep tabs on the developing problems such as oil or fluid leaks, loose or damaged parts etc. However, frequent washing can put the bike at the risk of displacing lubricants from cables and exposed grease points on old engines. If you’ve come back from the bush and your adventure bike is caked in mud, you will need a full wash straight away.
  3. Washing with proper agents is crucial to say the least. Don’t use a lot of water. Use the right cleaning product for the job. There is a product for every use. The big no are the abrasive cleaners or general-purpose household cleaning products as these can damage paint or chrome. Detergents should have a pH balance between six and eight, so it’s neither too acidic nor too alkaline as either could damage your paint. Check it’s safe to use on all paint types. Also, there is no point using the vinyl cleaners on the seat as it may look shiny but it will be slippery. Though the cleaning lubricants by the bike chain lubricant spray online india are of the best quality, it is still advised you wear rubber gloves.
By | 2020-05-04T11:24:06+05:30 April 20th, 2020|Blog, Chain Lubricants|0 Comments

About the Author:

Leave A Comment