Most riders aim at lubricating the bike chain, but forget to clean it in a proper manner. It can be convenient to apply lubricant on a dirty chain but it decreases effectiveness and lifespan of the chain and also sprockets. In order to actually enjoy the best chain lube, it is not optional to insure that one cleans the chain prior to using the best chain lube.

Dirt Gathers Quicker than You Think

Dust, mud, water and road grime are always exposed to bike chains. With time, this dirt combines with the old lubricant and creates a sticky surface which sticks to the chain. This accumulation makes movement cause frictions and prevents ease of movement.

New lubricant cannot penetrate well when it is applied over this layer. The lubricant instead of keeping the chain safe mixes with dirt to form an abrasive paste, which hastens the wear.

Lubrication Works Best on a Clean Surface

The primary role of lubrication is to minimize the friction between moving components. To achieve its purpose, the best chain lube will require being in direct contact with the metal surfaces of the chain.

A clean chain is used to enable the lubricant to trickle into the inner links and rollers and where friction is greatest. This provides easier transfer of power, less noise and enhanced ride comfort. Most of the lubricant will remain on the surface without cleaning and provide very little protection.

Dirty Chains Wear Out Faster

The wear of chains and sprockets would occur simultaneously. In cases where dirt particles are left on the chain, they scrap metal surfaces whenever one rides. This causes unequal extension of the chain and sprockets wear at a higher rate.

The best chain lube will not even stop the damage in case it is used on the dirty chain. The process of cleaning eliminates these abrasive particles and provides the lubricant with an opportunity to develop a protective layer which in fact decreases wear.

Less Maintenance, Better Lubrication

Another frequent complaint with riders is re-lubrication. The problem is in most instances not the product but the preparation. A clean chain retains its lubricant longer and works well in the long term.

The best chain lube lasts longer as the dirt is removed, thus increasing the kilometers before wear. This minimizes the number of times of maintenance and will save the rider time and money in the long run.

Improved Riding Experience

A contaminated chain usually creates noises, vibration, and rough power supply. These problems may have an impact on the confidence in the riding especially when riding long distance or in the city traffic. Washing the chain prior to lubrication enhances smoothness and minimization of undesired noise. When the chain is well maintained with the Best Chain Lube the throttle response becomes much better and the ride is more comfortable to the riders.

What is the frequency of cleaning the Chain?

The frequency of cleaning chains is relative to the conditions of riding. Dusty areas, rain, and heavy traffic mean that the bikes used undergo more frequent cleaning. In general, it should clean the chain prior to each lubrication cycle.

Cleaning does not necessarily have to be complex. All that is needed is a simple chain cleaner and a brush to clean up the dirt and old lubricant. After it is dried, the application of the Best Chain Lube provides the maximum protection and performance.

Small Step, Big Impact

The difference between cleaning chain is underestimated by a great number of riders. It is not sufficient to be lubricated. Even the quality of products does not show result, without cleaning.

Chain cleaning can add to the lifespan of chain, enhance performance and be the best with best chain lube as making it a routine task adds to the life of the chain. This minor measure takes a significant contribution in maintaining the bike smooth, efficient and reliable in the long run.